Because the daemon_memcached plugin supports the MySQL binary log, source server through the memcached interface can be replicated for backup, balancing intensive read workloads, and high availability. All memcached commands are supported with binary logging.
You do not need to set up the daemon_memcached plugin on replica servers. The primary advantage of this configuration is increased write throughput on the source. The speed of the replication mechanism is not affected.
The following sections show how to use the binary log capability when using the daemon_memcached plugin with MySQL replication. It is assumed that you have completed the setup described in Section 15.20.3, “Setting Up the InnoDB memcached Plugin”.
To use the daemon_memcached plugin with the MySQL binary log, enable the innodb_api_enable_binlog configuration option on the source server. This option can only be set at server startup. You must also enable the MySQL binary log on the source server using the --log-bin option. You can add these options to the MySQL configuration file, or on the mysqld command line.
mysqld ... --log-bin -–innodb_api_enable_binlog=1
Configure the source and replica server, as described in Section 17.1.2, “Setting Up Binary Log File Position Based Replication”.
Use mysqldump to create a source data snapshot, and sync the snapshot to the replica server.
source shell>mysqldump --all-databases --lock-all-tables > dbdump.dbreplica shell>mysql < dbdump.db
On the source server, issue SHOW MASTER STATUS to obtain the source binary log coordinates.
mysql> SHOW MASTER STATUS;On the replica server, use a CHANGE REPLICATION SOURCE TO statement (from MySQL 8.0.23) or CHANGE MASTER TO statement (before MySQL 8.0.23) to set up a replica server using the source binary log coordinates.
mysql>CHANGE MASTER TOMASTER_HOST='localhost',MASTER_USER='root',MASTER_PASSWORD='',MASTER_PORT = 13000,MASTER_LOG_FILE='0.000001,MASTER_LOG_POS=114;Or from MySQL 8.0.23: mysql>CHANGE REPLICATION SOURCE TOSOURCE_HOST='localhost',SOURCE_USER='root',SOURCE_PASSWORD='',SOURCE_PORT = 13000,SOURCE_LOG_FILE='0.000001,SOURCE_LOG_POS=114;
Start the replica.
mysql>START SLAVE;Or from MySQL 8.0.22: mysql>START REPLICA;
If the error log prints output similar to the following, the replica is ready for replication.
2013-09-24T13:04:38.639684Z 49 [Note] Replication I/O thread: connected to source 'root@localhost:13000', replication started in log '0.000001' at position 114
This example demonstrates how to test the InnoDB memcached replication configuration using the memcached and telnet to insert, update, and delete data. A MySQL client is used to verify results on the source and replica servers.
The example uses the demo_test table, which was created by the innodb_memcached_config.sql configuration script during the initial setup of the daemon_memcached plugin. The demo_test table contains a single example record.
Use the set command to insert a record with a key of test1, a flag value of 10, an expiration value of 0, a cas value of 1, and a value of t1.
telnet 127.0.0.1 11211Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'.set test1 10 0 1t1STORED
On the source server, check that the record was inserted into the demo_test table. Assuming the demo_test table was not previously modified, there should be two records. The example record with a key of AA, and the record you just inserted, with a key of test1. The c1 column maps to the key, the c2 column to the value, the c3 column to the flag value, the c4 column to the cas value, and the c5 column to the expiration time. The expiration time was set to 0, since it is unused.
mysql> SELECT * FROM test.demo_test;
+-------+--------------+------+------+------+
| c1 | c2 | c3 | c4 | c5 |
+-------+--------------+------+------+------+
| AA | HELLO, HELLO | 8 | 0 | 0 |
| test1 | t1 | 10 | 1 | 0 |
+-------+--------------+------+------+------+Check to verify that the same record was replicated to the replica server.
mysql> SELECT * FROM test.demo_test;
+-------+--------------+------+------+------+
| c1 | c2 | c3 | c4 | c5 |
+-------+--------------+------+------+------+
| AA | HELLO, HELLO | 8 | 0 | 0 |
| test1 | t1 | 10 | 1 | 0 |
+-------+--------------+------+------+------+Use the set command to update the key to a value of new.
telnet 127.0.0.1 11211Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'.set test1 10 0 2newSTORED
The update is replicated to the replica server (notice that the cas value is also updated).
mysql> SELECT * FROM test.demo_test;
+-------+--------------+------+------+------+
| c1 | c2 | c3 | c4 | c5 |
+-------+--------------+------+------+------+
| AA | HELLO, HELLO | 8 | 0 | 0 |
| test1 | new | 10 | 2 | 0 |
+-------+--------------+------+------+------+Delete the test1 record using a delete command.
telnet 127.0.0.1 11211Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'.delete test1DELETED
When the delete operation is replicated to the replica, the test1 record on the replica is also deleted.
mysql> SELECT * FROM test.demo_test;
+----+--------------+------+------+------+
| c1 | c2 | c3 | c4 | c5 |
+----+--------------+------+------+------+
| AA | HELLO, HELLO | 8 | 0 | 0 |
+----+--------------+------+------+------+Remove all rows from the table using the flush_all command.
telnet 127.0.0.1 11211Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'.flush_allOK
mysql> SELECT * FROM test.demo_test;
Empty set (0.00 sec)Telnet to the source server and enter two new records.
telnet 127.0.0.1 11211Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'set test2 10 0 4againSTOREDset test3 10 0 5again1STORED
Confirm that the two records were replicated to the replica server.
mysql> SELECT * FROM test.demo_test;
+-------+--------------+------+------+------+
| c1 | c2 | c3 | c4 | c5 |
+-------+--------------+------+------+------+
| test2 | again | 10 | 4 | 0 |
| test3 | again1 | 10 | 5 | 0 |
+-------+--------------+------+------+------+Remove all rows from the table using the flush_all command.
telnet 127.0.0.1 11211Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'.flush_allOK
Check to ensure that the flush_all operation was replicated on the replica server.
mysql> SELECT * FROM test.demo_test;
Empty set (0.00 sec)Binary Log Format:
Most memcached operations are mapped to DML statements (analogous to insert, delete, update). Since there is no actual SQL statement being processed by the MySQL server, all memcached commands (except for flush_all) use Row-Based Replication (RBR) logging, which is independent of any server binlog_format setting.
The memcached flush_all command is mapped to the TRUNCATE TABLE command in MySQL 5.7 and earlier. Since DDL commands can only use statement-based logging, the flush_all command is replicated by sending a TRUNCATE TABLE statement. In MySQL 8.0 and later, flush_all is mapped to DELETE but is still replicated by sending a TRUNCATE TABLE statement.
Transactions:
The concept of transactions has not typically been part of memcached applications. For performance considerations, daemon_memcached_r_batch_size and daemon_memcached_w_batch_size are used to control the batch size for read and write transactions. These settings do not affect replication. Each SQL operation on the underlying InnoDB table is replicated after successful completion.
The default value of daemon_memcached_w_batch_size is 1, which means that each memcached write operation is committed immediately. This default setting incurs a certain amount of performance overhead to avoid inconsistencies in the data that is visible on the source and replica servers. The replicated records are always available immediately on the replica server. If you set daemon_memcached_w_batch_size to a value greater than 1, records inserted or updated through memcached are not immediately visible on the source server; to view the records on the source server before they are committed, issue SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED.